1. Before dividing the board, first confirm whether the division program edited by the engineer is correct. When an engineer edits or recalls a previously used program, it is necessary to preview and check it. After checking that the programs of the left and right workbenches are correct, the engineer will process one piece on the left and one on the right for confirmation. After confirming that it is correct, the operator can operate by himself.
2. Put the PCB board to be stamped into the fixture, specify the direction of the board and the front and rear sides, put it into the fixture, gently press the positioning column of the positioning fixture of the board to confirm whether it is in place, and then cover the dividing fixture, press the left or the right green button. At this point, the workbench automatically enters the splitting position.
3. Click the preview button of the software, the button is red, and observe whether the position of each cutting is correct. After the inspection is correct, first click the stop button on the software. After a few seconds, the color turns green and automatically changes to the processing button, and the workbench automatically Exit, click the processing button on the software during official processing, and the processing starts.
